Witney Roof Company offering Roofing Re-Pointing services across Witney, Oxfordshire.
Witney Roof Company are experts in repointing from brick repointing, stone repointing and lime repointing.
If you need your house repointed to improve its overall look to add character and value to maximise your return in investment then look no further.
Our aim is to help you find the best cost effective solution for you. We are friendly and professional company and are happy to offer our services from residential customers to sub contractors to commercial clients in the Midlands.
Pointing is the term given to the ‘finish’ that is between the bricks or stone used to build your house. Depending on the age of the building, the mortar which was used to lay the stone or brick will either be made from lime, or more recently, cement. The issue of pointing is one which causes irreparable damage to older buildings if done wrongly, and it is important to understand what the mortar joints actually do for the fabric of the house.
It is possibly the most significant element to maintaining the ‘health’ of the wall and enhancing the appearance. The correct repointing can assist in waterproofing and stabilizing the walls of the structure, extend the life of the wall and individual stones and enhance the visual qualities of natural stone walls. The importance of this cannot be over-emphasised. Incorrect pointing can seriously reduce the performance of a wall and by implication a building. Water can become trapped behind dense mortar and not evaporate out, physical damage to stone and brick can result from poor work.
If the house is built using lime mortar, it is most likely that the walls are solid – they won’t have a cavity. These walls need to be treated very differently to ones with a cavity. These walls need to breathe – the stone and brick from which they are built is harder, and less absorbent than the lime mortar, and any moisture in the wall escapes through the mortar joints. This can be moisture from condensation on the inside of the walls, or water which falls on the outside of the wall from rainfall. If the mortar joints are left to breathe, your walls will stay dry. The lime mortar gradually ‘self sacrifices’ over many years, and recedes into the joint, so that eventually, there is a slot between the bricks or stone.
The commonest problem with old houses is flaking brick and spalling stone, which can almost always be traced back to when the joints were raked out, and cement mortar used to re-point them. If cement mortar is used, water will not escape the walls, and you will have damp problems inside the house as well. This is one of the common causes of so-called rising damp – it is nothing to do with rising damp, and the solution is NEVER an injection damp proof course!
This is death to an old house – you must ALWAYS rake out the joints and re-point using lime mortar, which should have NO portland cement in it. If in doubt, ask London repointing and we will insist on showing you proof that we know how to rake out, mix and use lime mortar, sometimes referred to as hydraulic lime mortar. We are NOT talking about buying a bag of sand, and a bag of lime from the builders merchant – this will not do the job, and is NOT the material we are talking about. Pointing old stonework or brickwork is a specialized job and must be done by people who know what they are doing. There are several grades of NHL lime – (Natural Hydraulic Lime) – and the three commonest grades are used for pointing stonework, brickwork, and where additional strength is needed, for eg., chimneys.
Another issue which you need to understand is that these houses were built to ‘move’ – the lime mortar is flexible. It actually moves and self heals – if a small crack develops because the house settles a tiny bit, or brickwork moves, the crack heals – lime has this amazing property of actually taking in water and carbon dioxide from the atmosphere, and growing tiny calcite crystals which span the cavity of the crack, and tie it together again. Using cement based compounds is an absolute no-no – this introduces rigidity, and in an old house which needs to move, cement just cracks and falls off within a short period of time – it is useless, and a completely inappropriate material to use.